Our Smart Weather Stations Feature Free Remote Monitoring, Alerts, IFTTT, Works with Alexa...
Home  >  Shopping Tools  >  Downloads  >  Ambient Weather WS-2000 Firmware Download Center

Ambient Weather WS-2000 Firmware Download Center

Firmware Update Procedure:

Important Notes:

  • To determine your firmware version, select Factory | About | Display from the console.


  1. Download the latest bin file (below) to your your computer. Make a note of where you saved this file.
  2. Copy the factory.bin to your MicroSD Card (the SD card must be empty).
  3. Power down your display console by removing AC power.
  4. Insert the SD Card into the display console.
  5. Power up the display console.
  6. The console will verify the firmware was updated.
  7. Power down the console after complete. Remove the SD Card when the console is powered down.

Where to purchase a MicroSD Card:

You can purchase one at Amazon, here (4, 8, 16 or 32 GB will work):

Kingston 4 GB microSDHC Class 4 Flash Memory Card SDC4/4GB

Firmware Update Downloads and History:

November 14 2018 | Version 1.2.1

  • The console could not connect to a non-secure network. This issue was resolved.
    September 21 2018 | Version 1.2.0

  • February was incorrectly spelled "Febuary".
    July 11 2018 | Version 1.1.0

  • Critical update. Console is bricked when archived data reaches 740th flash block address.
    July 3 2018 | Version 1.0.9

  • Added max daily wind gust to dashboard.
    June 30 2018 | Version 1.0.7

  • 10 minute average wind speed was not updating properly.
    SoftwareWhat's NewBest SellersSaleShopping ToolsCustomer Care