Ambient Weather WS-11-AC AC Adapter Replacement for the WS-11 / WS-110 Weather Station

If the sensor(s) have stopped communicating to your console,  it may be as simple as placing the remote(s) (powered up) about 10 feet away from the console, power down and up the console by removing one or more batteries, disconnecting from AC power (if applicable), wait 30 seconds, and put the batteries back in, then wait several minutes to resync.

DO NOT TOUCH ANY BUTTONS and look for the search icon. Wait until the search icon turns off before pressing any buttons.

If you have more than one sensor, make sure they are programmed to transmit on different channels.

If the problem persists, we have a one year warranty. To replace under warranty, please visit: www.AmbientWeather.com/rma.html

If the sensor displays “OF” and the console displays “LL”or “HH.H”, the senor must be replaced.

We have a one year warranty. For details, please visit: www.AmbientWeather.com/rma.html

Out of warranty replacements are available here:

F007PF:  https://www.ambientweather.com/amf007pf.html

F007T: https://www.ambientweather.com/amf007t.html

F007TH: https://www.ambientweather.com/amf007th.html

F007TP: https://www.ambientweather.com/amf007tp.html

The Models WS-1171B, WS-1172,  and WS-1173 were discontinued. Replacement sensors are no longer available.

We recommend the following similar replacements:

WS-2801A (requires an AC adapter):

https://www.ambientweather.com/amws2800.html

WS-2700 (optional AC adapter):

https://ambientweather.com/amws2700.html