Ambient Weather WR-334-U Weather Radio Recall Notice...
Home  >  Weather Stations  >  Maximum Weather Instruments  >  Maximum MAC3 Wind Speed Alarm & Controller

Maximum MAC3 Wind Speed Alarm & Controller

Maximum MAC3 Wind Speed Alarm & Controller
Click To Enlarge
In Stock
Item #: MX-MAC3
The MAC3 Wind Speed Alarm provides operators with a wealth of features and an unprecedented level of control. It is highly accurate, rugged and an ide... [Read More]
Our Price: $715.00

AC Adaptor: 
Qty:
Product Description
The MAC3 Wind Speed Alarm provides operators with a wealth of features and an unprecedented level of control. It is highly accurate, rugged and an ideal solution for managing commercial equipment by collecting and monitoring conditions and providing timely alerts to keep you abreast of wind speeds that could cause safety concerns for people and equipment in nearly endless applications.

Incorporating Maximum's renowned #400 anemometer, the MAC3 can be configured for simultaneous use with dual sensors to monitor two separate locations. The MAC3 integrates time delay and latching capabilities to prevent equipment damage due to frequent on/off power cycling, and has a large, easy-to-read green on black LCD panel for viewing wind speed conditions, settings and user-defined information such as wind speed averages, peak gusts and other key metrics. The instrument can be password protected to prevent unintended changes to settings, and the two (2) optional two 5 amp relays can provide on/off control for external devices such as outdoor venue equipment, agriculture devices, municipal fountains, construction equipment and lifts, cranes, security systems, awnings and gate controllers, outdoor advertising and an incredibly wide variety of other devices that can be affected or become unsafe in windy conditions.

The Maximum MAC3 controller and anemometer are weather-tight to the IP65 standard and rated for use from -40 to 158 degrees F (-40 to 70 degrees C). Operating in 12- and 24-Volt DC power source environments, the controller measures 5.08 inches wide x 7.39 inches high x 2.26 inches deep (129.0 mm x 187.8 mm x 57.4 mm).

MAC3 is shipped complete with one (1) #400 wind speed sensor, 100' sensor cable, 14" straight, stainless steel stub-mast and mast mounting hardware.

Generally leaves the warehouse in 1-3 business days.
Features
LED digital readout with 5/8" digits
Dual set points (2 alarms) 0-99 MPH
- Warning level: yellow
- Control level: red, with 85dB SPL (piezo buzzer)
Can be set to monitor high or low wind speeds
2 Relay outputs to operate external devices
- One SPDT relay for each set point
Non micro-processor circuit to minimize occurrence of latch-up
NEMA Type 4X weather-tight polycarbonate case with clear cover
- Power and sensor cables enter through bottom
- Internal screw apertures for surface mounting
Specifications:
Measurement Range 0 – 255 MPH
Accuracy +/- 2 MPH of input and +/- 1 digit
Sample Rate 1.7 seconds
Sound 85 dB(A)/10cm (min.) @ 3.1kHz, -40 to 70°C
Relays Two SPDT relays (rated at 5A at 30VDC)
Dimensions 7.39" height x 5.08" width x 2.26" depth
Weight 1.58lbs.
Operating Temperature -40° to +158°F (-40° to +70°C)
Power 12VDC @ 150mA; 24VDC @ 75mA
Current Draw 120mA Max with heater off, 970mA Max with heater on
Sensor 3-Cup #400 anemometer
Viewing Display 1.375” x 2.625”
CLOSE
SoftwareWhat's NewBest SellersSaleShopping ToolsCustomer Care