 | | | 
January 26, 2009, Version 14.00p054
-
Added support for several new stations, including the WMR200, RS300, RS600 and 6555.
-
Fixed minor issue with rate of change during archive download. Also, a small amount of data was missing between archive download and real time updates.
-
Fixed various links in the software. Added UV and solar radiation into Wunderground. Corrected station ID in Wunderground for WMR200 and Kestrel 4500.
-
Fixed various issues with slow and lost communication with the WMR100 and WMR200 weather stations by sending a keep alive pulse to the station. It also updates faster.
-
Added a out of range feature for heat index, dew point and wind chill. This out of range feature is used for all of the measured values but was missing for some of the calculated values.
-
Added two commands for Weather Undeground Rapid Fire command: &realtime=1&rtfreq=x.x where x.x is the update frequency in seconds.
-
Fixed issue with rain rate, hourly rain and 24 hour rain when using non-imperial units (metric and calibration gain).
-
Fixed issue with random bad WMR200 data.
-
Added the option to reboot Virtual Weather Station if communication is lost from the console. Select Settings | Program Settings | Restart Program if Communication Lost for 5 minutes.
-
The warning tag was displaying the last warning in the list. It now displays the first warning in the list.
-
The warning tag was displaying the last warning in the list. It now displays the first warning in the list.
-
Fixed several issues with the La Crosse weather stations, including random bad data and history text not being downloaded properly.
-
Fixed various crashing issues.
-
There was an issue with html tags if a blank Mesomap image was entered.
-
Addressed issue with negative temperature on TxWx Stations.
-
Changed Hourly Rain to old method. Hourly rain is based on the rainfall in the last hour as determined by your database. If your database does not have data from one hour ago, it uses the next point in your database.
Rain Rate is based on the rate calculated by your console and can be any variety of calculations. Please contact the manufacturer for method of calculation.
Total Rainfall, Rate of Change is defined as the instantaneous rain rate based on the differential equation (in la place domain format)
L(f(s)) = s / (Ts + 1), where T = 60 minutes, and transformed into the Z Domain.
-
Added adjustable baud rate for Peet Bros weather stations. It used to be fixed but now you can set to 2400 or 19200.
-
Updated WeatherLink to the latest DLL released by Davis Instruments (DLL 2.40).
-
Adds adjustable timer with WMR100 and WMR200 which results in much faster updates. You must set up your communication panel again so make a note of your comport and baud rate settings before you uprade. If you are running HeavyWeather, make a note of the filepaths. If you are running Peet, check your mode switch.
| | | |
