The New AirBridge for Davis Instruments® Weather Stations ...
Home  >  Weather Stations  >  Weather Stations for Wind Turbines  >  Ambient Weather Ocean Controls KTL-250-AL-KIT 12V Anemometer Modbus Interface w/ LCD and 64k Datalogging and Alarm System

Ocean Controls KTL-250-AL-KIT 12V Anemometer Modbus Interface w/ LCD and 64k Datalogging and Alarm System

Ambient Weather Ocean Controls KTL-250-AL-KIT 12V Anemometer Modbus Interface w/ LCD and 64k Datalogging and Alarm System
Ambient Weather Ocean Controls KTL-250-AL-KIT 12V Anemometer Modbus Interface w/ LCD and 64k Datalogging and Alarm System
Ambient Weather Ocean Controls KTL-250-AL-KIT 12V Anemometer Modbus Interface w/ LCD and 64k Datalogging and Alarm System
Ambient Weather Ocean Controls KTL-250-AL-KIT 12V Anemometer Modbus Interface w/ LCD and 64k Datalogging and Alarm System
Ambient Weather Ocean Controls KTL-250-AL-KIT 12V Anemometer Modbus Interface w/ LCD and 64k Datalogging and Alarm System
Click To Enlarge
In Stock
Item #: KTL-250-AL-KIT
The KTL-250 is an anemometer monitoring and alarming card. It allows the wind speed and direction to be measured with a Davis Instruments 7911 (include... [Read More]
Our Price: $469.99

Item 1: 

Item 2: 
Qty:


Product Description
The KTL-250 is an anemometer monitoring and alarming card. It allows the wind speed and direction to be measured with a Davis Instruments 7911 (included) Anemometer, without the need for the entire weather station.

Monitoring of the wind speed and direction can be done via the analog retransmission channels with 0-5V, 1-5V, 0-20mA or 4-20mA outputs. As well as monitoring the speed and direction, 2 alarm relays can be programmed to activate at a certain speed or wind direction range, or combination of the two. Wind speed and direction can also be monitored using the Modbus protocol with either USB or 2-wire RS-485 connection. All settings are set using the Modbus protocol and the provided software.

This model replaces the KTA-250.
Features
Connects to Davis Instruments 7911 Anemometer (included)
Monitor both the wind speed and direction
Interface to PLCs using the Modbus protocol
Communicate via USB or 2-wire RS485
Interface to PLCs/Instruments or other controllers using 4-20mA or 0-5V signals
Generate relay alarms depending on the wind speed and direction
Alarms can be monitored by the on board relays or via the Modbus protocol
DIN Rail or wall/panel mount


Software: We supply a software configuration package called "KTA-250 Configurator" which is a simple to use program. The configuration software allows the user to monitor the wind speed and direction, as well as the maximum and minimum speeds, and allows the user to configure all the available settings.


You May Also Like

Customer Reviews