|  | Abbeon T2000S Multifunctioning Measuring InstrumentThe digital technology avoids the drifting that occurs with analog devices!
Measure Air temperature , Absolute humidity , Air velocity, Material moisture, Surface temperature, Dew point, Relative humidity.
The heart of the T2000 is a 24-bit analog/digital converter which supplies long-term stable, precision results which analog instruments cannot achieve even in a rough environment.
The digital technology of the “Serial-Digital-Interface” (SDI) opens up a new dimension in flexibility in measuring ability for the user. Start with a T2000 with one probe and purchase other sensors as needed.
With the T2000 you have one single measuring instrument for many tasks instead of many instruments for one task!
There are no sensors shipped with this unit.
Ships in 1-3 business days.
|
|
 |  | Minimum, maximum, average and hold values | | | Calibration Settings | | | Thumbwheel enables simple one-handed operation | | | Rugged, compact housing | | | Attractive price/performance ratio | | | Large back-lit display | | | Instrument users include: | | | Installers of sanitary systems | | | Installers of heating systems | | | Flooring professionals | | | Housing Administrators | | | General and restoration contractors | | | Mold remediation specialists | |
|
| The T2000 automatically detects which sensor is attached when the SDI sensors are changed.
For the moisture measurement in buildings the T2000 offers 3 different methods:
1.) Hygrometric method:
Measuring the relative humidity in construction materials by using the climate sensors TS200 SDI with 12 mm diameter or TS240 SDI with 4 mm diameter only (especialy for measurement in holes drilled into joints).
2.) Capacitive and microwave method for raster scanning:
Non-destructive measuring of moisture distributions up to 4 cm away from the surface by using the TS300 SDI probe and measuring moisture distributions up to 20 - 30 cm away from the surface using the TS350 SDI probe.
3.) Resistance method:
Measuring the electrical resistance between two electrodes inserted into the material (construction material or wood) using electrode probes (only available for the T2000S model).
For Temperature measurements such as surface, insertion and immersion:
Both T2000 models accept Trotec PT100 sensors as well as non-Trotec sensors and thermocouples with an adapter cable.
For Airflow speed and Temperature measurements, SDI anemometer sensors are available.
The T2000E and T2000S are fitted with a 5 pin plug connector to which you can attach Trotec SDI and Pt100 sensors and is also compatible with non-Trotec sensors.
Use the 5pm plug connector (A)for:
Trotec SDI sensors with TC30 SDI connecting cable
Trotec Pt100 sensors (5-pin plug connector usually integrated)
Non-Trotec sensors with TC10 adapter cable
The T2000S also has a BNC input which supports the connection of electrodes for building and wood moisture measurement according to the resistance principle (Ohm’s Law).
T2000S Connection to BNC input (B) for:
Passive Trotec wood and building moisture sensors withTC20 connecting cable
Non-Trotec sensors with TC20 adapter cable
| |
|
|
